เครื่องบันทึกเสียงแบบพกพาสำหรับกล้อง DSLR และกล้องถ่ายวิดีโอ คุณภาพสูง ที่มาพร้อมเครื่องมือในการปรับมิกซ์เสียงตามที่คุณต้องการ สำหรับมืออาชีพ เพื่อคุณภาพของเสียงและภาพได้อย่างลงตัว สำหรับงานถ่ายวิดีโอ เครื่องกำเนิดสัญญาณ timecode ถูกรวมไว้สำหรับการอ้างอิงสถานที่ ด้วยการเชื่อมต่อจาก SMPTE กล้อง หรือ Smart slate มีช่องต่อ HDMI เข้าและออก ช่วยให้กล้อง DSLR สามารถเริ่มบันทึกภาพบนอุปกรณ์ทั้งสองเครื่องได้ และนาฬิกาวิดีโอจะป้องกันการเลื่อนระหว่างเสียงและภาพ 6-track recording (4 tracks + L-R stereo mix), BNC In for Sync to SMPTE, Dual Built-In Omnidirectional Mics, HDMI in Supports Start/Stop from DSLR, Writes Time Data to Recorded Audio Files

ใช้งานง่าย พกพาสะดวก สามารถติดตั้งบนตัวกล้อง/ด้านล่างกล้อง หรือจะใช้งานแบบ stand-alone ออกแบบมาสำหรับมืออาชีพที่ต้องการรายละเอียดสูง ทำงานทางด้านการถ่ายทำภาพยนตร์, ผลิตรายการโทรทัศน์, ด้านงานโฆษณา spot TV, ผลิตรายการสารคดี หรืองานอื่นๆ ที่ต้องการคุณภาพสูงและรายละเอียดสูง รองรับ SD card สูงสุด 128GB

Main Features

1. 6-track recording (4 tracks + L-R stereo mix)
2. Perfect camera sync using HDMI video clock synchronization
3. One button press on the camera starts sound recording
4. SMPTE timecode stores time data in recorded audio files
5. High-quality HDDA (High Definition Discrete Architecture) mic preamps
6. The magnesium-alloy chassis is lightweight yet rugged enough for daily on-set use
7. Multiple mic inputs support various recording options
8. Multiband limiter and 5-stage low-cut filter built-in
9. Record the built-in stereo mic together with external mics
10. A temperature-compensated crystal oscillator (TCXO) provides a solid internal clock
11. Designed for use with video and DSLR cameras
12. Slate tone generator for adjusting perfect sync
13. Stereo mini jack mic input (EXT IN 1/2) enables connection of mics for video cameras
14. Usability features prevent misoperation and improve ergonomics
15. Usable as a standalone field recorder
16. Optional external power using a USB mobile battery
17. Dual-recording function allows two files to be recorded simultaneously at different levels.
    

Features

• SD/SDHC/SDXC cards used for recording media.
• 6 maximum simultaneous recording tracks
• MONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modes
• Recording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording)
• Built-in original TASCAM HDDA mic preamps provide high audio quality
• Input levels can be adjusted separately for each track
• XLR/TRS inputs support +4dBu line level and 24/48V phantom power
• Clock and record start/stop can be synchronized with a camera using the HDMI port
• DR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line output
• Cascade function using HDMI connections allows multiple DR-701D transport and monitoring operations
• SMPTE Timecode can be input through the TC IN connector to add recording start times to files
• Timecode generator (RTC) allows recording start times to be added to files even when there is no timecode input
• Plug-in power mics and high output mics (EXT IN 1/2) supported
• OUT (CAMERA OUT) connector can output audio mixed by the DR-701D to a DSLR camera
• IN (CAMERA IN) connector enables monitoring the sound from a DSLR camera through the DR-701D
• High quality audio output through a line output jack separate from the headphones jack
• Headphones jack with 50mW+50mW maximum output
• Tripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) included
• Handles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strap
• Transport and SLATE buttons made of rubber suppress noise during operation
• HOLD switch prevents misoperation
• 128×64-dot graphic LCD with backlight
• LED lights have high visibility even in direct sunlight
• High-speed transfer of files to computers possible using USB 2.0
• Micro-B type USB cable included
• Powered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately)
• BP-6AA external battery pack (sold separately) enables operation for even longer times
• Optional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately)
• Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channels
• GANG function allows the levels of multiple channels to be controlled simultaneously
• Individual channel trim settings shown
• 5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequencies
• Multiband limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R)
• Delay function can compensate for distances between mics (+/-150 ms)
• Mid-side decoder function enables use with mid-side stereo mics
• Slate tone insertion functions (AUTO/MANUAL)
• Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)
  

SPECIFICATIONS

• Recording media : SD card (64MB to 2GB), SDHC card (4GB to 32GB), SDXC card (48GB to 128GB)

Recording format

• WAV : 44.1k/48k/96k/192k Hz, 16/24-bit
• BWF : 44.1k/48k/96k/192k Hz, 16/24-bit
  

Number of input channels

•  44.1k/48k/96k Hz : 4 maximum
• 192kHz : 2 maximum
  

Number of recording tracks

• 44.1k/48k/96k Hz : 6 maximum
• 192kHz : 2 maximum
  

Analog audio inputs (*The maximum input level the level that the input knob can be adjusted and a digital full-scale(0dBFS) signal can be input without distorting. **The minimum input level is the level that the input knob can be adjusted and a -20dBFS signal can be input.)

IN 1, IN 2, IN 3, IN 4 : XLR can provide phantom power

• Connectors : XLR-3-31 (1:GND, 2:HOT, 3:COLD) 6.3mm(1/4")standard TRS jacks(tip:HOT, Ring:COLD, Sleeve:GND)
• Input gain : “LOW”/”MID”/”HI”/”HI+”時
• Input impedance : 2k ohms
• Phantom power : 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level : +4dBu
• Minimum input level :-72dBu
• MIC input gain : TRIM MAX
• LOW : +20dB
• MID : +40dB
• HI : +52dB
• HI+ : +64dB
  

Input gain : "LINE"時
Input impedance : 10k ohms以上
Nominal input level : +4dBu
Maximum input level : +24dBu

EXT IN 1/2

• Connector : 3.5mm(1/8")stereo mini jack (can provide plug-in power)
• Input impedance : 10k ohms
• Maximum input level : +10dBV
• Minimum input level : -50dBV
• MIC input gain : TRIM MAX
• LOW : +3dB
• MID : +11dB
• HI : +26dB
• HI+ : +38dB
  

IN

• Connector : 3.5mm(1/8”) stereo mini jack
• Input impedance : 10k ohms
• Nominal input level : -10dBV
• Maximum input level :  +6dBV
  

Analog audio outputs
LINE OUT

• Connector : 3.5mm(1/8”) stereo mini jack
• Output impedance : 200 ohms
• Nominal output level :-14dBV
• Maximum output level : +6dBV
  

OUT

• Connector : 3.5mm(1/8”) stereo mini jack
• Output impedance : 200 ohms
• Nominal output level : -44dBV
• Maximum output level : +6dBV
  

PHONES

• Connector : 3.5mm(1/8")stereo mini jack
• Maximum output : 50mW + 50mW
  

Control inputs/outputs
HDMI IN/OUT

• Connectors : Type A receptacle

USB

• Connector : Micro-B
• Format : USB2.0 HIGH SPEED mass storage class
  

TIMECODE IN

• Connector : BNCConnector
• Signal voltage amplitude : 0.5Vp-p to 5Vp-p
• Input impedance : 10k ohms
• Format : SMPTE 12M-1999 compliant
  

REMOTE

• Connector : 2.5mm TRS jack

Power

• 4 AA batteries(Alkaline, NI-MH or lithium),
• AC adapter(TASCAM PS-P515U, sold separately),
• External battery pack(TASCAM BP-6AA, sold separately)
  

Power consumption : 6.5W(maximum)
Current consumption (USB bus power) : 1.3A(maximum)
Battery operation time (continuous operation) : 2ch WAV, 48kHz, 16bit rec (*When using phantom power, the operation time might be reduced depending on the mic being used.

1. Lithium (Energizer ULTIMATE LITHIUM)

• About 7:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
• About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
• About 3:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)

• About 4:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
• About 2:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
• About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  

3. Alkaline batteries (EVOLTA)

• About 3:45 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
• About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
• About 1:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  

BP-6AA (*BP-6AA is using the alkaline batteries (EVOLTA)
1. Lithium batteries (Energizer ULTIMATE LITHIUM)

• About 12:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
• About 7:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
• About 5:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  

2. NI-MH batteries (eneloop)

• About 9:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
• About 7:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
• About 4:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  

3. Alkaline batteries (EVOLTA)

• About 9:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
• About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
• About 3:45 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  

Dimensions : 169(W)×57.3(H)×113.5(D)mm (with the top adapter attached)
Weight : 654g (including batteries) / 567g (without batteries)
Operating temperature : 0˚C to 40˚C
Standard accessories : USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual

Audio performance
Distortion : 0.007% or less(MIC IN to LINE OUT Fs44.1k/48k/96k/192k Hz, JEITA)
S/N ratio : 100dB or more (MIC IN to LINE OUT, -10dBu入力, 1kHz, Fs44.1k/48k/96k/192k Hz, JEITA)
Equivalent input noise : -124dBu or less
Frequency response :

• 20-20kHz +0.5/-1dB(LINE IN to LINE OUT, Fs48kHz, JEITA)
• 20-40kHz +0.5/-1dB(LINE IN to LINE OUT, Fs96kHz, JEITA)
• 20-80kHz +0.5/-5dB(LINE IN to LINE OUT, Fs192kHz, JEITA)
  
    
  
  *Based on JEITA CP-2150